Westfalia.org Community - Powered by vBulletin

Results 1 to 6 of 6

Thread: Auto.-Transmission seems not engaged

  1. #1
    Join Date
    May 2009
    Posts
    3

    Default Auto.-Transmission seems not engaged

    Hi all,

    Recently, I removed the automatic transmission, replaced all seals and o-rings, plus a needle bearing and the turbine shaft rings, everything else looked fine.

    Today I put everything back together. The torque converter was engaged and the pump shaft was in place. However, after starting the engine there was a constant "klicking" noise coming from the torque converter (?) And when I switched gears D, 1, 2 or R it wouldn't do anything (van still on jack stands). I added an external oil filter and had most of the old fluid drained from the torque converter. I filled the transmission with a sufficient amount of Dextron ATF.

    I quite sure that the torque converter did not drag the pumpshaft out of the oil pump.


    Does anybody have a 'clear' idea what I was doing wrong or missing?

    Please help!

    TenCars

  2. # ADS
    Adsense Circuit advertisement
    Join Date
    Always
    Posts
    Many
     
  3. #2

    Default

    inbox mình cần thông tin với

  4. #3

    Default

    Ủng hộ bạn một vé nha. Chúc bạn vui vẻ

  5. #4

    Default

    bạn ở đâu v*y cho hỏi sản phẩm n*y như n*o

  6. #5

    Default

    bạn ở đâu v*y cho hỏi sản phẩm n*y như n*o

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •