Westfalia.org Community - Powered by vBulletin

Results 1 to 2 of 2

Thread: Vw Westfalia 1978 automatic trans slipping help!!

  1. #1
    Join Date
    Nov 2015
    Posts
    2

    Default Vw Westfalia 1978 automatic trans slipping help!!

    Hi guys;

    After engine rebuilt work in my Westy 1978 2.0 type4 (3 months) , I'm having problems with the automatic transmission, after run some minutes "slipping"....the same occurs in all speeds, is necessary turn off the engine a few seconds , when start run fine, but after a few seconds slipping again ...... ATF was removed to rebuilt the engine , after this same ATF added again, the level ATF rod has been revised several times at normal temps at idle, position "N", the marks are good, it feels as if the Torque converter without ATF and the westy does not move.
    It is the first time that happens to me, unfortunately I have not much experience with automatic trans.
    My trans is a golf or rabbit similar version, not appear specifiv info in my blue bentley manual for station wagons or bus.
    Similar experiences?....I want replace for new dexron ATF , but exist a filter for replace or clean??

    Regards.
    Last edited by pablovent; 11-19-2015 at 07:55 AM.

  2. # ADS
    Adsense Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •